Pages: 1 ... 3 4 [5] 6 7 ... 14
Reply Reply New Topic New Poll
  Topic Name: POST UP YOUR RIGS Reply #80 on: April 22, 2013, 08:24:48 PM
Vonpotter


Posts: 21


View Profile
« Reply #80 on: April 22, 2013, 08:24:48 PM »

My main ride: a 2010 Trek PDX Hybrid. Its a great bike for the money. I was a little financially short to buy a Fargo, so I bought this and have been upgrading it over the years. Aluminum frame with steel fork with mid blade braxe-ons, lots of room for bigger tires (could clear 45c tires no problem
I've upgraded the crank to X7, the rear derailleur to Rival, the front Derailleur to Apex and X7 2x10 shifters. Also a Brooks saddle, some no-brand bars that I love, Easton stem, Continental 35c Cyclocross speed tires, Ergon Grips and a lot of my own creations.

This pic was taken before I finished swapping the drivetrain. The front lowriders and tent holder were made by me
Logged

  Topic Name: POST UP YOUR RIGS Reply #81 on: April 22, 2013, 08:29:37 PM
AnatolyG


Location: Portland, OR
Posts: 32


View Profile WWW
« Reply #81 on: April 22, 2013, 08:29:37 PM »

My main ride: a 2010 Trek PDX Hybrid. Its a great bike for the money. I was a little financially short to buy a Fargo, so I bought this and have been upgrading it over the years. Aluminum frame with steel fork with mid blade braxe-ons, lots of room for bigger tires (could clear 45c tires no problem
I've upgraded the crank to X7, the rear derailleur to Rival, the front Derailleur to Apex and X7 2x10 shifters. Also a Brooks saddle, some no-brand bars that I love, Easton stem, Continental 35c Cyclocross speed tires, Ergon Grips and a lot of my own creations.

This pic was taken before I finished swapping the drivetrain. The front lowriders and tent holder were made by me


That's a dope ride! When you want to step it up, all you have to do is just buy a new frame, and all your components are already going to be good. I do that all the time, get components for as little as I can, and just change out frames. I am now on a Niner MCR with pretty much all x9. Love the ride, got rid of a Fargo for it, well worth it!
Logged

  Topic Name: POST UP YOUR RIGS Reply #82 on: April 22, 2013, 08:31:05 PM
AnatolyG


Location: Portland, OR
Posts: 32


View Profile WWW
« Reply #82 on: April 22, 2013, 08:31:05 PM »

New bag setup for my Jones in prep for a CT trip this summer. Pictures about 3 months old...the bags are a little dirtier now  icon_biggrin

How do you like the ride of the Jones? Could you tell me what bikes have you ridden before, and how they compare? I love the look of the space frame -- I know you have the Diamond, but still, I am really interested in the ride. Thank you!
Logged

  Topic Name: POST UP YOUR RIGS Reply #83 on: April 22, 2013, 09:01:03 PM
Vonpotter


Posts: 21


View Profile
« Reply #83 on: April 22, 2013, 09:01:03 PM »

My other ride. Haven't rigged it up at all yet

'12 Fuji Suncrest
Logged

  Topic Name: POST UP YOUR RIGS Reply #84 on: April 23, 2013, 05:48:25 PM
mountainjah


Location: D go-go, CO.
Posts: 90


View Profile
« Reply #84 on: April 23, 2013, 05:48:25 PM »

Patience, persistance and a lot of paychecks have led to the assemblage of my new rig for this summer.  headbang

2013 Salsa El Mar, OR Lateral Dry Bag, Wingate Stem Bags, King Cage stem mount, custom Bedrock framebag and Coconino Seat Bag.

big ups to Joey Durango for all the guidance!


* photo[1].JPG (507.76 KB, 1296x968 - viewed 3182 times.)
Logged

michaelackerman.org

  Topic Name: POST UP YOUR RIGS Reply #85 on: April 24, 2013, 04:12:55 AM
Area54
Moderator


Location: Daisy Hill, Brisbane Australia
Posts: 418


View Profile
« Reply #85 on: April 24, 2013, 04:12:55 AM »

Here's my little snow rig:



More here:

http://troyszczurkowski.blogspot.com.au/2013/03/muru-witjira-fatbike-build-for-ultimate.html  part 1
http://troyszczurkowski.blogspot.com.au/2013/04/muru-witjira-fatbike-build-for-ultimate.html  part 2

Logged

Amazing where riding a bike will take you...

  Topic Name: POST UP YOUR RIGS Reply #86 on: April 30, 2013, 01:08:35 PM
Bndst


Location: Rollinsville, CO
Posts: 31


View Profile
« Reply #86 on: April 30, 2013, 01:08:35 PM »

How do you like the ride of the Jones? Could you tell me what bikes have you ridden before, and how they compare? I love the look of the space frame -- I know you have the Diamond, but still, I am really interested in the ride. Thank you!

I really like my Jones. I'd wanted a Ti Spaceframe for a few years, but after talking with Jeff a few times and riding both the ti and steel spaceframes, as well as the steel diamond, I settled on the diamond since it's a little more conducive to bikepacking setups. The fact that Porcelain Rocket is making stock diamond frame bags is a huge bonus in my book too. As for differences in ride quality between the spaceframe and diamond; I believe the truss fork adds quite a bit of front end rigidity, but that's not to say that the unicrown fork is lacking in any performance or noticeable stiffness. I also ride a Canfield Yelli Screamy and, while it's a bit of an apples-oranges comparison, I prefer the overall handling and seating position on the Jones; definitely feels more like I'm sitting "inside the bike" and in control IMO. For reference: I'm 5'9", the bike has roughly a 73.5cm saddle height and is running loop bars with an 80mm Thomson X4.

Cheers!

-CB
Logged

  Topic Name: POST UP YOUR RIGS Reply #87 on: May 02, 2013, 02:51:36 PM
mjr5house


Location: Orlando, FL
Posts: 20


View Profile WWW
« Reply #87 on: May 02, 2013, 02:51:36 PM »

My stumpy EVO in RV mode.


* image.jpg (131.26 KB, 640x478 - viewed 2999 times.)
Logged


  Topic Name: POST UP YOUR RIGS Reply #88 on: May 14, 2013, 09:50:28 PM
Eugenemtbing


Posts: 79


View Profile
« Reply #88 on: May 14, 2013, 09:50:28 PM »

My homemade bags are coming along... Am working on a top tube bag and a harness/bar bag.  Note that the small one on the stem is a Mountain Feedbag.  Will put one of Eric's Revelate seat bags on the back!
Logged

  Topic Name: POST UP YOUR RIGS Reply #89 on: September 28, 2013, 08:54:03 PM
2WExplorer

Proceeding on...


Location: Central MN, USA
Posts: 11


View Profile WWW
« Reply #89 on: September 28, 2013, 08:54:03 PM »

New pic of both my MTB and touring bike set to to go:

I also rather like this set-up from Joff Summerfield of the UK, and his choice in headgear!
Note the packs on the frame.

Ride safe,
Hans
Logged

"Life is either a great adventure, or it is nothing at all." Helen Keller

  Topic Name: POST UP YOUR RIGS Reply #90 on: September 29, 2013, 05:38:11 PM
cpblue

Cut it with a multi tool


Location: Boise, ID
Posts: 32


View Profile
« Reply #90 on: September 29, 2013, 05:38:11 PM »

Just picked up  GT Zaskar 29.  Saturday's ride just outside of Boise, FR 275 I believe.  Soon to have bags and lights. 


* image.jpg (757.43 KB, 1632x1224 - viewed 2811 times.)
Logged

  Topic Name: POST UP YOUR RIGS Reply #91 on: May 08, 2014, 08:08:04 AM
Vonpotter


Posts: 21


View Profile
« Reply #91 on: May 08, 2014, 08:08:04 AM »

Updated pics with new racks and mounts
The tent holder and feedbag are courtesy of yours truly




Logged

  Topic Name: POST UP YOUR RIGS Reply #92 on: May 08, 2014, 11:36:46 AM
asatrur


Location: Longmont, CO
Posts: 35


View Profile
« Reply #92 on: May 08, 2014, 11:36:46 AM »

Here is my rig. Still working on the bags, etc.
Logged

  Topic Name: POST UP YOUR RIGS Reply #93 on: May 08, 2014, 05:20:24 PM
harryonaspot


Posts: 405


View Profile
« Reply #93 on: May 08, 2014, 05:20:24 PM »

Von Potter.   Cool bars, What are they?  Thanks, Harry
Logged

  Topic Name: POST UP YOUR RIGS Reply #94 on: May 08, 2014, 06:23:23 PM
Vonpotter


Posts: 21


View Profile
« Reply #94 on: May 08, 2014, 06:23:23 PM »

They are a VERY hard to come by set of kalloy bars. They were also made under the Dexter name. I bought one pair at the LBS a few years back. After that I spent years searching for another set.
Searched eBay, pinkbike, mtbr, everywhere. Nodda. Zip. Zilch.

Ended up finding a second set in the attic of the same LBS. I'm bogarting them Smiley

They are an amazing bar. Thanks for the props 
Logged

  Topic Name: POST UP YOUR RIGS Reply #95 on: May 09, 2014, 12:08:23 PM
Paul_c


Posts: 13


View Profile
« Reply #95 on: May 09, 2014, 12:08:23 PM »



All home made bags.  2012 Kona unit 32x20 for bikepacking.  CB Iodine 3 wheels, answer carbon 20/20 bars, ESI chunky grips, avid elixir 3 brakes.




Sent from my hammock
Logged

  Topic Name: POST UP YOUR RIGS Reply #96 on: May 11, 2014, 04:02:22 AM
iamrockandroll13


Posts: 22


View Profile
« Reply #96 on: May 11, 2014, 04:02:22 AM »

El Mariachi Ti:

Rigid Geared Mode


Rigid Single Speed Mode


Single Speed Hardtail Mode


Geared Hardtail Mode - full set up

Fargo:

Logged

  Topic Name: POST UP YOUR RIGS Reply #97 on: May 11, 2014, 09:08:53 AM
bmike-vt


Location: Horgen, Switzerland
Posts: 1122


View Profile WWW
« Reply #97 on: May 11, 2014, 09:08:53 AM »

^^^ whole new meaning to 'anything cage'. Wow.
Logged


  Topic Name: POST UP YOUR RIGS Reply #98 on: May 11, 2014, 06:59:13 PM
iamrockandroll13


Posts: 22


View Profile
« Reply #98 on: May 11, 2014, 06:59:13 PM »

^^^ whole new meaning to 'anything cage'. Wow.


haha. I was doing a little touring, fit one of those on each side...was way too difficult for offroad use. this is a more typical set up.

Still waiting on SRAM to send me my new Hydros.
Logged

  Topic Name: POST UP YOUR RIGS Reply #99 on: May 12, 2014, 08:29:04 AM
Smo


Location: Flagstaff, AZ
Posts: 138


View Profile WWW
« Reply #99 on: May 12, 2014, 08:29:04 AM »

Got back from the first overnighter with my new gear.  The bike itself I built up from half new and half used parts, starting with a Gravity frame/fork combo.  It was a great deal, and only cost $50 more than the fork costs by itself.  I'm 100% sold on 29er hardtails.

Picture is on the AZ trail north of Flagstaff . . gorgeous up there.  What you see is my entire overnighter setup, I carried no backpack.  At times I had 3 liters of water in the framebag and another liter in the seatbag.  The stuff sack + pad strapped to the handlebars works great, but I'll be happy when I have the convenient of a handlebar roll.

I use about 1 liter of volume for a day's food, so once I have the roll made, gas tank and jerry can, and an under-the-downtube toolbag, I should be able to go for 3 or 4 nights without a backpack.  I've become a big fan of having my back free and open to the wind - no more sweaty shirts at the end of the day.  If I need extra space I'll bring a small fanny pack that I can stuff in one of my bags after a day or two.


* 0510141712-800.jpg (329.15 KB, 800x792 - viewed 3173 times.)
« Last Edit: May 12, 2014, 08:36:57 AM by Smo » Logged

Nick Smolinske, Rogue Panda Designs custom bikepacking gear
  Pages: 1 ... 3 4 [5] 6 7 ... 14
Reply New Topic New Poll
Jump to: