bikeny
Posts: 140
|
 |
« on: July 23, 2019, 01:59:44 PM » |
|
So I've decided to put this up for sale, as I just don't get enough use out of it and could use the funds instead. Included is the Waltworks steel frame, Jeff Jones titanium truss fork, Chris King truss fork specific headset, Niner Biocentric 83mm EBB, and seatpost collar. No, I will not separate the frame and fork, as the frame was designed for this Jones fork. Frame is a custom Waltworks steel frame with a Niner 83mm EBB. Originally designed for a Rohloff internal gear hub, so has the extended NDS Rohloff dropout as well as cable guides for the Rohloff. I didn't get along great with the Rohloff, so I sold it and set the bike up with a normal 1x11 drivetrain. Frame has a derailleur hanger but no guides for that, so I just used some Velcro wrap to run full housing. Frame will fit 29+ tires as well as 27.5x3.8, at least the smaller ones. I ran a Hodag on a Hugo rim without issue. Size is about a medium / large, I have a geometry drawing I can send to those interested. The frame is powdercoated matte black, although it's actually more like a satin finish, not quiet shiny and not quiet matte. It's a little duller where the straps were from my bags. The powder is a bit bumpy where the frontmost strap was on the top tube. I tried to get a picture, but it's a bit hard to photograph. I have some other parts still from the build I can include for extra cost, wheelset, cranks. stem, seatpost, saddle. Asking $1300, not including fees and shipping.
Frame: Waltworks, 135mm QR rear spacing for Rohloff, 83mm EBB
Fork: Jones titanium truss fork, 135mm QR, front disc spacing
Headset: Chris King, Jones specific
Bottom Bracket: Niner Biocentric 30, spaced out to 83mm
|
