Rohloff Speed Hub ******SOLD*****

[Briansong]

Hey gang,

I tried but just can't make the switch, old habits die hard. This hub has no more than 700 miles on it. In all honesty, I just don't care for it. Black, complete with twist style shifter. I also have a Gates Carbon drive with extra belt to sell. 46/22 (add 150.00) Still have box and all the docs for the hub.

775.00 for just the Speed hub.
150.00 for Gates Drive.

[mojami04]

Hi,

I am enquiring about your Rolloff Speed Hub.  Is this the original version? I'm not 100% familiar with the Hub's mechanism but would this be a one size fits all type. I'm looking to add one to my Salsa Fargo 2017 which has the dropouts for the RSH.

Do you have all the parts included?  Photos?

Regards,

Jamie

[Briansong]

Not sure how to answer your question. Its a 2014 Speedhub 500/14 complete with twist style shifter? You'd need to inquire with your LBS as to fitment. I guess I have all the parts as it's on my bike right now and it works as intended. It may require something to be fitted to your particular bike.

[RonK]

Not sure how to answer your question. Its a 2014 Speedhub 500/14 complete with twist style shifter? You'd need to inquire with your LBS as to fitment. I guess I have all the parts as it's on my bike right now and it works as intended. It may require something to be fitted to your particular bike.

Well, maybe I can help.

Which one of these do you have? Speedhub 500/14 I assume it is for a frame with a rear dropout spacing of 135mm.

For the 2017 Fargo I think mojami04 will need a Speedhub 500/14 CC DB OEM EX and according to the Salsa Fargo framesheet he will need the Alternator plates FS1371 and FS2360. He will need to route the cables along the top tube and down the seat stay.

However, as long as it is DB (disc brake), then the OEM end plate and the EX (external gear mech) can be bought separately.

If your Speedhub is the Boost A12 version I don't think Salsa have an alternator plate for it.

[Briansong]

Thanks for all that Ron. All the box I have says is Speedhub 500/14 CC DB. It does have a disc.. I know when my mechanic built my Caletti he need some additional stuff to get it to mount in full. The part would not be sent to him until the frame was approved for Rolloff torque as tested by Gates, at Gates in Denver. I surely didn't expect that. The frame passed no problem, part was sent and bike was finished. Not sure if it was the frame being approved for the Rohloff or the Gates drive. In any event, Cylcemonkey only sent the adapter after Gates approved, whatever was their concern.

Thanks again,

Steve

[Norm]

You interested in another Caletti frame?   I have an older 29er mountain frame from John I would trade for the Rohloff.  PM me regardless, as I might be interested in purchasing as well.

Thanks for all that Ron. All the box I have says is Speedhub 500/14 CC DB. It does have a disc.. I know when my mechanic built my Caletti he need some additional stuff to get it to mount in full. The part would not be sent to him until the frame was approved for Rolloff torque as tested by Gates, at Gates in Denver. I surely didn't expect that. The frame passed no problem, part was sent and bike was finished. Not sure if it was the frame being approved for the Rohloff or the Gates drive. In any event, Cylcemonkey only sent the adapter after Gates approved, whatever was their concern.

Thanks again,

Steve