These are take-offs from a new bike:
I have 3 take-offs from a new El Mariachi that I don't really need.
Pro Moto 1 stem - 120mm, black/blue, +/-5 degree: $50 plus shipping
(
http://salsacycles.com/components/pro_moto_1_stem)
Pro Moto 1 Carbon Flat Bar - Carbon/Blue, 660mm uncut, 11 degree sweep, 31.8: $70 plus shipping
(
http://salsacycles.com/components/pro_moto_1_carbon_flat)
Pro Moto 1 Carbon Seat Post - Carbon/Blue, 27.2 x 350 mm, 2.5mm Offset: $60 plus shipping
(
http://salsacycles.com/components/pro_moto_1_seatpost)
Buy all 3: $160 plus shipping
No crashes with any of these components. They are like new and have been test ridden only once before they came off the bike. The only indication of use is the less than perfect shine on the seat post where it was inserted in the frame and the bars show the marks where the brakes and shifter were installed.
They came off because the stem was too long, the seat post too short, and the bars don't have enough sweep for my wrists. No other reason; they just don't fit me.
