Bikepacking.net forums > Forums > DIY / Make Your Own Gear (MYOG) > DIY (Seatpack-) Rack
  Pages: [1]
Reply Reply New Topic New Poll
  Topic Name: DIY (Seatpack-) Rack on: February 13, 2018, 05:22:48 AM
tobster


Posts: 1


View Profile
« on: February 13, 2018, 05:22:48 AM »
Hello Guys,

I'm all new to this Forum, this is my first post! Because I got so much ideas from your DIY work I wanted go give something back by contributing the rack I made!

Suggestions for improvement are very welcome!

The Intention was to design a rack that can hold a dry bag, doesn't swing around, has options to mount other stuff to it and all this without being heavier than a traditional seatpack! I used 10x2mm Aluminium pipes and bent it with a selfmade bender, my brother did the welding.

Hope you can Display the Pictures, they are attached...

* IMG_20180211_173713.jpg (531.74 KB, 1632x1224 - viewed 1789 times.)

* IMG_20180211_175235.jpg (484.51 KB, 1632x1224 - viewed 1751 times.)

* IMG_20180211_182149.jpg (551.66 KB, 1632x1224 - viewed 1757 times.)

* IMG_20180211_184559.jpg (560.09 KB, 1306x979 - viewed 1769 times.)

* IMG_20180211_184640.jpg (434.37 KB, 1306x979 - viewed 1751 times.)
« Last Edit: February 14, 2018, 05:35:57 AM by tobster » Logged

  Topic Name: DIY (Seatpack-) Rack Reply #1 on: March 09, 2018, 11:50:36 AM
bikeny


Posts: 140


View Profile
« Reply #1 on: March 09, 2018, 11:50:36 AM »
Nice work, but it looks an awful lot like the PDW Bindle:

https://ridepdw.com/products/bindle-rack
Logged
  Pages: [1]
Reply New Topic New Poll
Jump to: