DIY (Seatpack-) Rack

Home Forums Routes Gear Reviews How to contribute Personal setups Trip reports Ultra records
Help Search Login Register

Bikepacking.net forums > Forums > DIY / Make Your Own Gear (MYOG) > DIY (Seatpack-) Rack

Pages: [1]

Topic Name: DIY (Seatpack-) Rack

on: February 13, 2018, 05:22:48 AM

tobster

Posts: 1

DIY (Seatpack-) Rack

« on: February 13, 2018, 05:22:48 AM »

Hello Guys,

I'm all new to this Forum, this is my first post! Because I got so much ideas from your DIY work I wanted go give something back by contributing the rack I made!

Suggestions for improvement are very welcome!

The Intention was to design a rack that can hold a dry bag, doesn't swing around, has options to mount other stuff to it and all this without being heavier than a traditional seatpack! I used 10x2mm Aluminium pipes and bent it with a selfmade bender, my brother did the welding.

Hope you can Display the Pictures, they are attached...

IMG_20180211_173713.jpg (531.74 KB, 1632x1224 - viewed 1789 times.) IMG_20180211_175235.jpg (484.51 KB, 1632x1224 - viewed 1751 times.) IMG_20180211_182149.jpg (551.66 KB, 1632x1224 - viewed 1757 times.) IMG_20180211_184559.jpg (560.09 KB, 1306x979 - viewed 1769 times.) IMG_20180211_184640.jpg (434.37 KB, 1306x979 - viewed 1751 times.)
« Last Edit: February 14, 2018, 05:35:57 AM by tobster »	Logged

Topic Name: DIY (Seatpack-) Rack

Reply #1 on: March 09, 2018, 11:50:36 AM

bikeny

Posts: 140

Re: DIY (Seatpack-) Rack

« Reply #1 on: March 09, 2018, 11:50:36 AM »

Nice work, but it looks an awful lot like the PDW Bindle:

https://ridepdw.com/products/bindle-rack


	Logged

Pages: [1]