Lighting » Fenix Digital P3D Q5 LED flashlight
From the Fenix Store,
Introduction of Fenix P3D (Cree Edition) Flashlight
The Fenix P3D CE is a high-tech, rugged tool that’s perfect for any lighting application. It features six levels of output, which not only allows the user to select the best compromise between brightness and runtime for any given task but also has ability to aid in an emergency. What’s more, the Fenix P3D CE throws an awesome 160 lumens beam, an incredible amount of light for a light of any size. If you’re looking for a flashlight with solid reliability, digitally regulated brightness, and compact size, this Fenix is for you.
Features
Utilizes a Cree 7090 XR-E LED with a life of 50,000 hours
Two modes of output, selected by turning the bezel
General Mode: 9 lumens (65hrs) -> 40 lumens (13hrs) -> 90 lumens (4.8hrs) -> SOS
Turbo Mode: 160 lumens (1.8hrs) -> Strobe
33 days of survival use (2 continuous hours per day on the lowest setting)
Digitally Regulated for Constant Brightness
Low Battery Indication
Uses two CR123A battery (not included)
11.4cm (L) x 2.1cm (D) ( or 4.5 in (L) x 0.8 in (D) )
Made of aircraft grade aluminum
Durable Type III hard anodized finish
49.2-gram (or 1.7 oz) weight (excluding batteries)
Water-resistant (dunkable)
Toughened ultra clear glass lens with AR coating
Push-button tailcap switch
Capable of standing up securely on a flat surface to serve as a candle
Battery not included
Includes a holster, a lanyard, two spare o-rings, and a rubber switch boot.
Product link: Fenix Store
Please rate this product: (no login required)
This is what I used on my head for Trans Utah (I had one of my custom lights on the bars). I’ve been making custom lights for a few years but this looked easier and better than anything I could put together – and I was right. With roughly 12 hours night riding and also using the light for camp use, I used 2 sets of batteries. The light pattern is excellent – a large hot spot surrounded by a wide cone of usable light. Cree XR-E Q5 LED puts out a lot of light and this flashlight enabled me to ditch the wires. It looks like it was recently discontinued but there are several similar lights.
For a mount I went super simple: I taped the flashlight to a helmet mount for a Princeton Tech EOS. No fear of electrical/duct tape here. A soft rubber strip between the mount and helmet allowed a bit too much flex so the light bounced in the rubble, but the light itself was perfect for the task.
One drawback is the use of odd 3V CR123A batteries. They would be hard to find at likely supply points – one of the AA versions might be better if this is an expected deal killer.
Hi. I am neoseikan, the producer of Neofab Legion II, the brightest single LED flashlight. Would you like to introduce this light in your blog? It has 742~748 real torch lumens.
If you are interested, here is the link: http://www.cpfmarketplace.com/mp/showthread.php?t=191371
Thank you!
Led lights are great because they are long lasting and consumes less electricity.;”~
I have some flashlights and i’m very pleased with Armytek Viking. It is really what I want! This flashlight shines at the long distances and you can see the road, the trees around you, every hole on the road. Any enviromental factor as rain, dirt, vibration and so on doen’t influence on it.
Hi there, I discovered your site by means of Google at
the same time as looking for a comparable subject, your website got here up, it appears to be like great.
I’ve bookmarked it in my google bookmarks.
Hi there, simply became aware of your blog via Google, and found that it’s truly informative.
I am going to watch out for brussels. I’ll be grateful in case you continue this in future. Lots of other folks shall be benefited out of your writing. Cheers!
Magnificent beat ! I would like to apprentice while you amend your site, how can i subscribe for a blog site?
The account aided me a acceptable deal. I had been tiny bit
acquainted of this your broadcast provided bright clear concept